BV3000测试探针
配置手册
北京大唐高鸿数据网络技术有限公司
串口连接设备：
探针配置
Booting 'Brix Verifier'
… …
System startup success
login: admin
Password: admin
> en（进行模式）
#
# bench-cfg（进入到BC模式）
(bc)#
(bc)# ?（查看当前命令）
alert-level Set the alert level
… …
write Save and activate configuration changes
(bc)# device-name TEST-01（配置探针名称－
命名规则为省的缩写-市的缩写-机房的缩写-03,如辽宁沈阳浑南机房，LN-SY-HN-03）
(bc)# show interfaces（查看接口信息，需配置第一个测试口，即eth2，连网时也请注意）
……
Test Interface 1 (eth2) link is down
addr: 0.0.0.0/0 (dynamic)
acquisition: dhcp
mac address: 00:03:01:ff:66:84
mtu: 1500, speed: unknown unknown (sfp not present)
Received: 0 bytes, 0 packets
0 errors, 0 dropped, 0 overruns, 0 frame
Transmit: 0 bytes, 0 packets
……
(bc)# interface ethernet 2（进入到eth2口接口配置模式）
(config-eth2)# ? （查看当前命令）
acquisition Set the acquisition mechanism for the interface
… …
write Save and activate configuration changes
(config-eth2)# acquisition fixed（设置IP地址模式为静态）
(config-eth2)# address 59.43.50.245/30（设置IP地址及子网掩码）
(config-eth2)# default-gateway 59.43.50.246（设置默认网关）
(config-eth2)# end（退出当前模式）
(bc)#
(bc)# server discovery local 59.43.50.193（配置VPN监控服务器地址）
(bc)# server discovery network 59.43.50.193（配置VPN监控服务器地址）
(bc)# server discovery universal 59.43.50.193（配置VPN监控服务器地址）
(bc)#
(bc)# terminal telnet（开启telnet服务）
(bc)# terminal ssh （开启SSH服务）
(bc)#
(bc)# write（保存配置）
Bench configuration changes saved
Save bench configuration changes to running configuration? [Y/N]: y（确定）
Running configuration changes saved
TEST-01(bc)#
TEST-01(bc)# exit（退出当前模式）
TEST-01# reboot（重启探针）
The system is being rebooted from the CLI
TEST-01# The system is going down NOW !!
Restarting system.
… …
System startup success
TEST-01 login: admin
Password: admin
TEST-01>
TEST-01> en（进行模式）
TEST-01#
TEST-01# erase running-cfg（清除当前运行配置文件）
Running configuration erased, reverted to bench configuration
TEST-01#reboot（重启探针）
The system is being rebooted from the CLI
TEST-01# The system is going down NOW !!
Restarting system.
… …
System startup success
TEST-01 login: admin
Password: admin
TEST-01>
TEST-01> en（进行模式）
TEST-01#
TEST-01# show server（查看VPN监控服务器配置）
communications discovery
TEST-01# show server discovery
Universal Discovery List: 59.43.50.193
Network Discovery List: 59.43.50.193
Local Discovery List: 59.43.50.193
Comm-port: 80
TEST-01# show interfaces（查看接口配置）
……
Test Interface 1 (eth2) link is down
addr: 59.43.50.245/30 (fixed)
default-gateway: 59.43.50.246 (fixed)
acquisition: fixed
mac address: 00:03:01:ff:66:84
mtu: 1500, speed: unknown unknown (sfp not present)
Received: 0 bytes, 0 packets
0 errors, 0 dropped, 0 overruns, 0 frame
Transmit: 0 bytes, 0 packets
0 errors, 0 dropped, 0 overruns, 0 carrier
0 collisions
……
TEST-01# show bench-cfg（查看BC配置）
Device name: TEST-01
IP settings
domain-name:
… …
Interface eth2
acquisition: fixed
address: 59.43.50.245/30
default-gateway: 59.43.50.246
mtu: 1500
speed: auto
duplex: auto
… …
Server Discovery Settings
Universal Discovery List: 59.43.50.193
Network Discovery List: 59.43.50.193
Local Discovery List: 59.43.50.193
Terminal settings
telnet: enabled
ssh: enabled
radius server:
radius port: 1812
radius shared-secret:
Alert level: debug
Log level: info
TEST-01# show log（查看log日志，确认探针与VPN监控服务器IP地址的交互）
08-05-2011 03:07:36 : INFO : Connect 59.43.50.193:80 fail (Connection refused)
08-05-2011 03:07:36 : INFO : Lookup host '59.43.50.193' -> 59.43.50.193
08-05-2011 03:07:39 : INFO : Connect 59.43.50.193:80 fail (Connection refused)
08-05-2011 03:07:39 : INFO : Lookup host '59.43.50.193' -> 59.43.50.193
08-05-2011 03:07:42 : INFO : Connect 59.43.50.193:80 fail (Connection refused)
08-05-2011 03:07:42 : INFO : Lookup host '59.43.50.193' -> 59.43.50.193
08-05-2011 03:07:45 : INFO : Connect 59.43.50.193:80 fail (Connection refused)
08-05-2011 03:07:45 : INFO : Lookup host '59.43.50.193' -> 59.43.50.193